System: Chassis (C-Code)
SAE Standard (Generic)
Family: Brake Pedal Feedback Pressure Circuit
Code C0024: Brake Pedal Feedback Pressure Solenoid Circuit
Diagnostic & Technical Explanation
Code C0024 (Brake Pedal Feedback Pressure Solenoid Circuit) sets when the module cannot drive or read the pedal-feel simulator circuit that pressurizes a small hydraulic chamber against the driver's foot on a brake-by-wire system, giving the pedal a conventional feel even though the master cylinder is decoupled from the wheels. A fault here means either the feedback solenoid's coil circuit is open or shorted, or the pressure sensor confirming that feedback cannot report a valid signal. Causes include a failed solenoid coil, a cracked feedback simulator seal, or corrosion at the compact connector shared by both circuits.
First-listed procedure
Rank #1
Inspect pedal feel simulator connector
Moderate DIY
This is the first procedure in the authored
consideration order, not a measured cause likelihood. Execute it only when its prerequisites
and diagnostic findings support it. Its cost and labor estimates (where known), the step-by-step procedure and the
remaining 3 procedure(s) are in the licensed dataset. Ordering context.
Full family: Brake Pedal Feedback Pressure Circuit
What this page does not show
This page publishes the fault mechanism and the code index. The licensed dataset adds, for
every one of the 15,886 codes, the full authored repair set (56,729 procedures in total)
with the fields deliberately withheld here:
- Procedures 2..n after the first-listed procedure
- Aftermarket parts cost ranges in USD (
est_parts_cost_min/max_usd)
- Professional labor-hour estimates (
est_labor_hours)
- Step-by-step diagnostic and repair instructions
- Replacement-part mappings and catalog lookups
- 6,637 manufacturer-specific OEM codes across 32 makes ($149 tier)