System: Chassis (C-Code)
SAE Standard (Generic)
Family: Brake Pedal Switch Stop Lamp Circuit
Code C0041: Brake Pedal Switch B
Diagnostic & Technical Explanation
Code C0041 (Brake Pedal Switch B) sets when the module sees an implausible state from the brake pedal switch(es) that both illuminate the stop lamps and tell the ABS/cruise/shift-interlock systems the brake pedal is applied -- the switch stays closed, stays open, or the two redundant switch channels disagree with each other. A misadjusted switch plunger, a worn switch contact, or corrosion at the switch connector near the pedal bracket are the common causes. Because this switch also feeds the stop lamps and brake-transmission shift interlock, a fault here can cause symptoms well beyond ABS, from stuck-on brake lights to a shifter that will not release from Park.
First-listed procedure
Rank #1
Adjust brake pedal switch plunger clearance
Easy DIY
This is the first procedure in the authored
consideration order, not a measured cause likelihood. Execute it only when its prerequisites
and diagnostic findings support it. Its cost and labor estimates (where known), the step-by-step procedure and the
remaining 3 procedure(s) are in the licensed dataset. Ordering context.
Full family: Brake Pedal Switch Stop Lamp Circuit
What this page does not show
This page publishes the fault mechanism and the code index. The licensed dataset adds, for
every one of the 15,886 codes, the full authored repair set (56,729 procedures in total)
with the fields deliberately withheld here:
- Procedures 2..n after the first-listed procedure
- Aftermarket parts cost ranges in USD (
est_parts_cost_min/max_usd)
- Professional labor-hour estimates (
est_labor_hours)
- Step-by-step diagnostic and repair instructions
- Replacement-part mappings and catalog lookups
- 6,637 manufacturer-specific OEM codes across 32 makes ($149 tier)