System: Powertrain (P-Code)
SAE Standard (Generic)
Family: Intermediate Shaft Selection Actuator Position Sensor
Code P2E15: Intermediate Shaft Selection Actuator Position Sensor Circuit
Diagnostic & Technical Explanation
Code P2E15 (Intermediate Shaft Selection Actuator Position Sensor Circuit) covers the position sensor confirming the intermediate shaft selector - used on dual-clutch and automated manual transmissions to preselect the next gear on a secondary shaft - has reached its commanded position. The ECM flags an open, shorted, implausible, or intermittent signal. Causes are a worn sensor track, metallic debris in the fluid interfering with sensor readings, or a connector fault at the mechatronic unit.
First-listed procedure
Rank #1
Inspect intermediate shaft actuator connector
Easy DIY
This is the first procedure in the authored
consideration order, not a measured cause likelihood. Execute it only when its prerequisites
and diagnostic findings support it. Its cost and labor estimates (where known), the step-by-step procedure and the
remaining 2 procedure(s) are in the licensed dataset. Ordering context.
Full family: Intermediate Shaft Selection Actuator Position Sensor
What this page does not show
This page publishes the fault mechanism and the code index. The licensed dataset adds, for
every one of the 15,886 codes, the full authored repair set (56,729 procedures in total)
with the fields deliberately withheld here:
- Procedures 2..n after the first-listed procedure
- Aftermarket parts cost ranges in USD (
est_parts_cost_min/max_usd)
- Professional labor-hour estimates (
est_labor_hours)
- Step-by-step diagnostic and repair instructions
- Replacement-part mappings and catalog lookups
- 6,637 manufacturer-specific OEM codes across 32 makes ($149 tier)