MechanicDB
System: Powertrain (P-Code) SAE Standard (Generic) Family: Throttle Actuator Motor Circuit

Code P2101: Throttle Actuator A Control Motor Circuit Range/Performance

Diagnostic & Technical Explanation
P2101 (Throttle Actuator A Control Motor Circuit Range/Performance) is set when the drive-by-wire throttle actuator motor's control circuit reports an open winding, a short, an out-of-range current draw, or the throttle plate's measured position that does not track the commanded motor current. Carbon and oil-vapor buildup on the throttle bore increasing motor load, a worn brush-type motor drawing excess current, and a corroded connector at the throttle body are the leading physical causes.

First-listed procedure

Rank #1 Clean throttle bore and plate of carbon buildup Easy DIY

This is the first procedure in the authored consideration order, not a measured cause likelihood. Execute it only when its prerequisites and diagnostic findings support it. Its cost and labor estimates (where known), the step-by-step procedure and the remaining 3 procedure(s) are in the licensed dataset. Ordering context.

Full family: Throttle Actuator Motor Circuit

What this page does not show

This page publishes the fault mechanism and the code index. The licensed dataset adds, for every one of the 15,886 codes, the full authored repair set (56,729 procedures in total) with the fields deliberately withheld here: