System: Powertrain (P-Code)
SAE Standard (Generic)
Family: PTO Enable Switch Circuit
Code P258E: PTO Enable Switch Performance
Diagnostic & Technical Explanation
Code P258E (PTO Enable Switch Performance) sets when the ECM sees an open, shorted, or implausible signal from the driver's power take-off (PTO) enable switch, or the switch fails a plausibility/performance check, used on commercial and vocational trucks to allow auxiliary equipment engagement. Causes are worn switch contacts, a corroded connector in the cab harness, or chafed wiring between the switch and the ECM.
First-listed procedure
Rank #1
Clean PTO enable switch contacts
Easy DIY
This is the first procedure in the authored
consideration order, not a measured cause likelihood. Execute it only when its prerequisites
and diagnostic findings support it. Its cost and labor estimates (where known), the step-by-step procedure and the
remaining 2 procedure(s) are in the licensed dataset. Ordering context.
Full family: PTO Enable Switch Circuit
What this page does not show
This page publishes the fault mechanism and the code index. The licensed dataset adds, for
every one of the 15,886 codes, the full authored repair set (56,729 procedures in total)
with the fields deliberately withheld here:
- Procedures 2..n after the first-listed procedure
- Aftermarket parts cost ranges in USD (
est_parts_cost_min/max_usd)
- Professional labor-hour estimates (
est_labor_hours)
- Step-by-step diagnostic and repair instructions
- Replacement-part mappings and catalog lookups
- 6,637 manufacturer-specific OEM codes across 32 makes ($149 tier)